Revision of Inspection Measuring & Test Equip. Procedure from Mon, 24/12/2012 - 5:26pm

3 Procedure

The management of PPF ensure that all the equipment whose measurement can affect the product quality is calibrated against traceable national/international standards.

5.1 Identification
All the inspection, measuring & test equipment used in PPF will be identified with unique identification number. The scheme of identification will start from 001.

The identification number will be indicated on all equipment by suitable indicator i.e. Engraving, affixing of sticker, permanent with pen or any other suitable indicator.

5.2 Master List of All Inspection Measuring & Testing Equipment

MR will maintain the Master Calibration Record of inspection, measuring & test equipment. After each calibration, MR will update the record of calibration.

5.3 Calibration

External calibration agency will be approved by MR. Before approval he makes sure that calibration agency has the standard traceable to International standards.

Store In charge  will send the equipment to calibration agency in proper casing or call the agency inside the company. Upon receiving the equipment and calibration certificate from calibration agency, he will make sure that “Calibration Status” sticker is pasted on the equipment. This sticker shows the date of calibration and next due date. He will also maintain the records of these certificates and update the calibration schedule card.

All the in-house calibration is carried out according to documented work instructions by using the traceable standards and performed by trained personnel. Calibration Data Card is used to record the calibration results.
PM is responsible to make an annual calibration plan of all inspection, measuring and test equipment.